Точка доступа Aruba (HPE) JZ320A

  • Состояние: Новое
  • Наличие: Товар в наличии
  • P/N: JZ320A
Код товара: 010641


Описание Точка доступа Aruba (HPE) JZ320A

Точки доступа Aruba (HPE) обеспечивают быструю и стабильную беспроводную передачу данных в корпоративной сети. Aruba предлагает как простые устройства для предоставления базового функционала сети Wi-Fi, так и для сетей с высокой плотностью пользователей и скоростями до 2 Гбит/с, а также защищенные модели для работы в сложных климатических условиях.

Точки доступа просты в инсталляции, могут работать одновременно в диапазонах 2,4 и 5 ГГц, используют технологию MIMO для увеличения скорости передачи данных и поддерживают стандарт 802.11ac Wave2.

Instant-точки доступа Aruba — не требуют отдельного контроллера, а используют виртуальный контроллер, функции которого выполняет одна из точек. HPE Aruba Instant — это решение, которое позволяет развернуть «бесконтроллерную» сеть WiFi корпоративного уровня. В него уже встроена сетевая безопасность, автоматическое управление RF и достаточно интеллектуальных функций для запуска полноценного решения без дополнительного лицензирования. Управляется кластер из точек доступа при помощи виртуального контроллера, который размещается на одной из точек доступа (IAP). Контроллер отвечает за процесс автоконфигурирования новых точек доступа, авторизацию и аутентификацию, гостевой доступ и сетевые сервисы (NAT, DHCP и др.). 

Технические характеристики точки доступа Aruba (HPE) JZ320A: 


  • Unified AP – deploy with or without controller
    • The 303 Series access points can be deployed in either controller-based (ArubaOS) or controller-less (InstantOS) deployment mode
  • Dual Radio 2x2 802.11ac access point with Multi-User MIMO (wave 2)
    • Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 client devices) and up to 300Mbps in the 2.4GHz band (with 2SS/HT40 clients)
    • Backwards compatible with 100/1000Base-T
  • Built-in Bluetooth Low-Energy (BLE) radio
    • Enables location based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time
    • Enables asset tracking when used with Aruba Asset Tags
  • Advanced Cellular Coexistence (ACC)
    • Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment
  • Quality of service for unified communications applicationsAruba AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 1,500 enterprise apps or groups of apps
    • Supports priority handling and policy enforcement for unified communication apps, including Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing
  • RF Management
    • Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs
    • The Aruba 303 Series Access Points can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available
  • Spectrum analysis
    • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4GHz and 5GHz radio bands to identify sources of RF interference from HT20 through VHT80 operation
  • Security
    • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
    • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
    • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys



The Aruba 303 Series Access Points offer a choice of deployment and operating modes to meet your unique management and deployment requirements:

  • The 303 Series AP is a unified AP that supports both controller-based and controller-less deployment modes, providing maximum flexibility.
  • Controller-based mode – When deployed in conjunction with an Aruba Mobility Controller, Aruba 303 Series Access Points offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.
  • Controller-less (Instant) mode – The controller function is virtualized in a cluster of APs in Instant mode. As the network grows and/or requirements change, Instant deployments can easily migrate to controller-based mode.
  • Remote AP (RAP) mode for branch deployments
  • Air monitor (AM) for wireless IDS, rogue detection and containment
  • Spectrum analyzer (SA), dedicated or hybrid, for identifying sources of RF interference
  • Secure enterprise mesh portal or point

For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, the Instant APs are factory-shipped to any site and configure themselves when powered up.



  • Hardware Variant
    • AP-303: Internal antenna models.



  • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
  • 5GHz (radio 0):
    • Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2SS VHT80 client devices
    • Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to two 1SS MU-MIMO capable client devices simultaneously
  • 2.4GHz (radio 1):Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
    • Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate to individual 2SS HT40 client devices
  • Supported frequency bands (country-specific restrictions apply):Available channels: Dependent on configured regulatory domain
    • 2.400 to 2.4835GHz
    • 5.150 to 5.250GHz
    • 5.250 to 5.350GHz
    • 5.470 to 5.725GHz
    • 5.725 to 5.850GHz
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power:
    • Configurable in increments of 0.5dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
    • 2.4GHz band: +21dBm (18dBm per chain)
    • 5GHz band: +21dBm (18dBm per chain)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20MHz, 40MHz and 80MHz channels
  • Space-time block coding (STBC) for increased range and improved  reception
  • Low-density parity check (LDPC) for high-efficiency error correction  and  increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 300 (MCS0 to MCS15)
    • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
    • 802.11n high-throughput (HT) support: HT20/40
    • 802.11ac very high throughput (VHT) support: VHT20/40/80
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU



  • AP-303: Internal antenna models.
    • Two vertically polarized dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.3dBi (2.4GHz) and 5.9dBi (5GHz) per antenna.
    • The antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
    • Combining the patterns of both antennas per radio, the peak gain of the average (effective) pattern is 2.1dBi in 2.4GHz and 4.6dBi in 5GHz.



  • E0: One 10/100/1000BASE-T Ethernet network interface (RJ-45)DC power interface, accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length
    • Auto-sensing link speed and MDI/MDX
    • POE-PD: 48Vdc (nominal) 802.3af POE
  • Bluetooth Low Energy (BLE) radioVisual indicators (tri-color LEDs): for System and Radio status
    • Up to 3dBm transmit power (class 2) and -93dBm receive sensitivity
    • Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 4.5dBi
  • Reset button: factory reset (during device power-up), LED mode control (normal/off)
  • Serial console interface (proprietary, µUSB physical jack)
  • Kensington security slot



  • The AP supports direct DC power and Power over Ethernet (POE)
  • When both power sources are available, DC power takes priority over POE
  • Power sources are sold separately
  • Direct DC source: 12Vdc nominal, +/- 5%
  • Power over Ethernet (POE): 48Vdc (nominal) 802.3af compliant source
  • Maximum (worst-case) power consumption: 10.1W (POE) or 8.8W (DC)
  • Maximum (worst-case) power consumption in idle mode: 4.2W (POE) or 4.0W (DC)



  • The AP ships with a (black) mount clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
  • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details.



  • Dimensions and weight (unit, excluding mount accessories):
    • 150mm (W) x 150mm (D) x 35mm (H) or 5.9" (W) x 5.9" (D) x 1.4" (H)
    • 260g or 9.2oz
  • Dimensions and weight (shipping):
    • 190mm (W) x 180mm (D) x 60mm (H) or 7.4" (W) x 7.0" (D) x 2.4" (H)
    • 410g or 14.5oz



  • O erating:
    • Temperature: 0° C to +40° C (+32° F to +104° F)
    • Humidity: 5% to 93% non-condensing
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)



  • CE Marked
  • RED Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • UL/IEC/EN 60950
  • EN 60601-1-1 and EN 60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.



  • AP-303: APIN0303



  • MTBF: 795khrs (91yrs) at +25C operating temperature



  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+



  • Aruba limited lifetime warranty



  • ArubaOS & Aruba InstantOS

Отзывы о Точка доступа Aruba (HPE) JZ320A

Добавить отзыв

Написать отзыв

Опыт использования *
Ваша оценка
Войти с помощью:
Мы используем файлы cookies, чтобы сделать наш веб-сайт максимально интересным для Вас. Нажав на "Принять", Вы разрешаете использовать файлы cookies на своем устройстве. Пользовательское соглашения